All 32 pieces are redesigned with more streamlined silhouettes, angular visors and futuristic shells: black with subtle gold accents, white with silver accents. The half-boards, their decorations and the storage slots are kept. After printing, fit the hinge knuckles of the two half-boards together and insert the two pins; the pieces store lying down in their slots. Dimensions: 213 × 242 × 33 mm. Printing tips: Keep the orientation provided: sculptures standing on their bases, half-boards with the squares against the build plate. The set takes up about 213 × 242 mm; plan for a usable build plate of at least 220 × 250 mm, or spread the complete pieces over several prints. 0.4 mm nozzle, 0.16 to 0.20 mm layers, 3 walls and 15 to 20% infill. Local supports under the hinge knuckles, snouts and crown overhangs. PLA+ for the sculptures; PETG recommended for the cases, latches and pins. Use gold and silver metallic filaments for the small accents, with compatible materials within each piece. Export the colours separately with color_index from 1 to 6, keeping their coordinates.