Model of the stone façade shown in the image, with its flared staircase, fluted pilasters, niches, the two central openings and the broken pediment. With no dimensions supplied, the total height is set at 214 mm; the perspective is straightened and the back simplified to obtain a single part on a base. Dimensions: 164 × 68 × 214 mm. Printing tips: Print upright, base flat in the orientation provided. Add local supports under the door lintel, the top of the arch, the niche vaults and the cornices with overhangs greater than 45°. Matte beige PLA recommended, 0.4 mm nozzle, 0.12 to 0.16 mm layers, 3 perimeters and 15 to 20% infill. Carefully remove the supports around the mouldings and urns.